View T498D106K050ATE1K0_8379753.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 1 one world. one kemet benefts ? m eets or exceeds eia standard 535baac ? t aped and reeled per eia 481C1 ? sy mmetrical, compliant terminations ? o ptional gold-plated terminations ? l aser-marked case ? 1 00% surge current testing ? c omplies with aecCq200 ? ca pacitance values of 0.47 f to 220 f ? t olerances of 10% and 20% ? v oltage rating of 6 C 50 vdc ? 1 00% steady-state accelerated aging ? t emperature/voltage derating is 2/3 at 150c ? r ohs compliant and lead-free terminations standard ? o perating temperature range of -55?c to +150?c applications typical applications include decoupling and fltering in industrial and automotive end applications such as dc/dc converters, portable electronics, telecommunications, and control units operating at temperatures up to 150c. overview the kemet t498 series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150c. advanced materials and testing allow this series to perform with a reliability level of 0.5%/1,000 hours at rated voltage and temperature. the t498 series is available in fve standard eia case sizes with rohs compliant terminations as standard. tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series environmental compliance rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder. spice for a detailed analysis of specifc part numbers, please visit www.kemet.com for a free download of kemet's spice software. the kemet spice program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and dc bias conditions.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 2 2 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series ordering information t 498 x 227 m 010 a t e800 capacitor class series case size capacitance code (pf) capacitance tolerance voltage failure rate/ design lead material esr packaging (c-spec) t = tantalum high temperature 150oc a, b, c, d, x first two digits represent signifcant fgures. third digit specifes number of zeros. k = 10% m = 20% 006 = 6.3 v 010 = 10 v 016 = 16 v 020 = 20 v 025 = 25 v 035 = 35 v 050 = 50 v a = n/a z = n/a t = 100% matte tin (sn) plated g = gold plated last three digits specify esr in m. (800 = 800 m) blank = 7" reel 7280 = 13" reel performance characteristics item performance characteristics operating temperature -55c to 150c rated capacitance range 0.33 C 220 f @ 120 hz/25c capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 6 C 50 v df (120 hz) refer to part number electrical specifcation table esr (100 khz) refer to part number electrical specifcation table leakage current 0.01 cv (a) at rated voltage after 5 minutes
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 3 3 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series qualifcation test condition characteristics endurance 150c @ 2/3 rated voltage, 2,000 hours c/c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits storage life 150c @ 0 volts, 2,000 hours c/c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits thermal shock milCstdC202, method 107, condition b, mounted, -55c to 150c, 1,000 cycles c/c within 5% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits temperature stability extreme temperature exposure at a succession of continuous steps at +25oc, -55oc, +25oc, +85oc, +150oc, +25oc +25c -55c +85c +150c c/c i l* 10% 10% 20% df il il 1.5 x il 1.5 x il dcl il n/a 10 x il 12 x il surge voltage 25c and 85c, 1.32 x rated voltage 1,000 cycles (150c, 1.2 x rated voltage) c/c within 5% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/vibration milCstdC202, method 213, condition i, 100 g peak milCstdC202, method 204, condition d, 10 hz to 2,000 hz, 20 g peak c/c within 10% of initial value df within initial limits dcl within initial limits *il = initial limit
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 4 4 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series electrical characteristics 0.1 1 10 100 1000 100 1,000 10,000 100,000 1,000,000 10,000,000 capacitance (f) frequency (hz) t498b106m010ate1k8 t498d476m010ate600 t498x227m010ate500 capacitance vs. frequency esr vs. frequency 0.1 1 10 100 1000 100 1,000 10,000 100,000 1,000,000 10,000,000 impedance, esr (ohms) frequency (hz) t498b106m010ate1k8_imp t498d476m010ate600_imp t498b106m010ate1k8_esr t498x227m010ate500_imp t498d476m010ate600_esr t498x227m010ate500_esr dimensions C millimeters (inches) metric will govern 15 termination cutout at kemet?s option, either end case size component eia l* w* h* f* 0.1 (.004) s* 0.3 (.012) b* 0.15 (ref) .006 x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) a 3216C18 3.2 0.2 (0.126 0.008) 1.6 0.2 (0.063 0.008) 1.6 0.2 (0.063 0.008) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 0.10 (.004 .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051) b 3528C21 3.5 02 (0.138 0.008) 2.8 0.2 (0.110 0.008) 1.9 0.2 (0.075 0.008) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087) 6032C28 6.0 0.3 (0.236 0.03) 3.2 0.3 (0.126 0.012) 2.5 0.3 (0.098 0.012) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) d 7343C31 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 2.8 0.3 (0.110 0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) x 7343C43 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 0.3 (0.157 0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) notes: (ref) C dimensions provided for reference only. no dimensions provided for b, p or r because low profle cases do not have a bevel or a notch. * milCprfC55365/8 specifed dimensions
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 5 5 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity vdc f kemet/eia (see below for part options) a +20oc max/5 min % @ +20oc 120 hz max m @ 20oc 100 khz max (ma) 100 khz 25oc (ma) 100 khz 85oc (ma) 100 khz 125oc refow temp 260oc 6.3 10 b/3528-21 t498b106(1)006a(2)e2k1 0.6 6.0 2100 201 181 80 1 6.3 15 b/3528-21 t498b156(1)006a(2)e1k8 0.9 6.0 1800 217 195 87 1 6.3 22 c/6032-28 t498c226(1)006a(2)e1k3 1.4 6.0 1300 291 262 116 1 6.3 33 b/3528-21 t498b336(1)006a(2)e1k7 2.1 6.0 1700 224 202 90 1 6.3 47 c/6032-28 t498c476(1)006a(2)e800 3.0 6.0 800 371 334 148 1 6.3 100 d/7343-31 t498d107(1)006a(2)e600 6.3 8.0 600 500 450 200 1 10 2.2 a/3216-18 t498a225(1)010a(2)e4k6 0.5 6.0 4600 128 115 51 1 10 3.3 a/3216-18 t498a335(1)010a(2)e3k6 0.5 6.0 3600 144 130 58 1 10 4.7 a/3216-18 t498a475(1)010a(2)e2k9 0.5 6.0 2900 161 145 64 1 10 4.7 b/3528-21 t498b475(1)010a(2)e2k7 0.5 6.0 2700 177 159 71 1 10 10 b/3528-21 t498b106(1)010a(2)e1k8 1.0 6.0 1800 217 195 87 1 10 15 b/3528-21 t498b156(1)010a(2)e1k5 1.5 6.0 1500 238 214 95 1 10 15 c/6032-28 t498c156(1)010a(2)e1k8 1.5 6.0 1800 247 222 99 1 10 22 b/3528-21 t498b226(1)010a(2)e1k5 2.2 6.0 1500 238 214 95 1 10 22 c/6032-28 t498c226(1)010a(2)e1k1 2.2 6.0 1100 316 284 126 1 10 47 d/7343-31 t498d476(1)010a(2)e600 4.7 6.0 600 500 450 200 1 10 100 d/7343-31 t498d107(1)010a(2)e600 10.0 8.0 600 500 450 200 1 10 220 x/7343-43 t498x227(1)010a(2)e500 22.0 8.0 500 574 517 230 1 16 1 a/3216-18 t498a105(1)016a(2)e6k5 0.5 4.0 6500 107 96 43 1 16 3.3 a/3216-18 t498a335(1)016a(2)e3k4 0.5 6.0 3400 149 134 60 1 16 4.7 b/3528-21 t498b475(1)016a(2)e2k1 0.8 6.0 2100 201 181 80 1 16 6.8 a/3216-18 t498a685(1)016a(2)e2k6 1.1 6.0 2600 170 153 68 1 16 6.8 b/3528-21 t498b685(1)016a(2)e1k8 1.1 6.0 1800 217 195 87 1 16 10 b/3528-21 t498b106(1)016a(2)e2k8 1.6 6.0 2800 174 157 70 1 16 10 c/6032-28 t498c106(1)016a(2)e1k4 1.6 6.0 1400 280 252 112 1 16 15 c/6032-28 t498c156(1)016a(2)e1k1 2.4 6.0 1100 316 284 126 1 16 22 c/6032-28 t498c226(1)016a(2)e1k0 3.5 6.0 1000 332 299 133 1 16 33 d/7343-31 t498d336(1)016a(2)e600 5.3 6.0 600 500 450 200 1 16 47 d/7343-31 t498d476(1)016a(2)e600 7.5 6.0 600 500 450 200 1 16 68 d/7343-31 t498d686(1)016a(2)e600 10.9 6.0 600 500 450 200 1 16 100 x/7343-43 t498x107(1)016a(2)e100 16.0 8.0 100 1285 1157 514 1 20 1 a/3216-18 t498a105(1)020a(2)e5k9 0.5 0.5 5900 113 102 45 1 20 10 c/6032-28 t498c106(1)020a(2)e1k1 2.0 2.0 1100 316 284 126 1 25 0.47 a/3216-18 t498a474(1)025a(2)e8k5 0.5 4.0 8500 94 85 38 1 25 2.2 b/3528-21 t498b225(1)025a(2)e3k0 0.6 6.0 3000 168 151 67 1 25 10 c/6032-28 t498c106(1)025a(2)e1k1 2.5 6.0 1100 316 284 126 1 25 10 d/7343-31 t498d106(1)025a(2)e1k0 2.5 6.0 1000 387 348 155 1 25 15 d/7343-31 t498d156(1)025a(2)e700 3.8 6.0 700 463 417 185 1 25 22 d/7343-31 t498d226(1)025a(2)e600 5.5 6.0 600 500 450 200 1 25 33 d/7343-31 t498d336(1)025a(2)e600 8.3 6.0 600 500 450 200 1 35 0.33 a/3216-18 t498a334(1)035a(2)e11k 0.5 4.0 11000 83 75 33 1 35 1 a/3216-18 t498a105(1)035a(2)e10k 0.5 4.0 10000 87 78 35 1 35 1.5 c/6032-28 t498c155(1)035a(2)e3k3 0.5 6.0 3300 183 165 73 1 35 3.3 c/6032-28 t498c335(1)035a(2)e1k7 1.2 6.0 1700 254 229 102 1 35 6.8 d/7343-31 t498d685(1)035a(2)e900 2.4 6.0 900 408 367 163 1 vdc f kemet/eia (see below for part options) a +20oc max/5 min % @ +20oc 120 hz max m @ 20oc 100 khz max (ma) 100 khz 25oc (ma) 100 khz 85oc (ma) 100 khz 125oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated. designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. table 1 C ratings & part number reference
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 6 6 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity vdc f kemet/eia (see below for part options) a +20oc max/5 min % @ +20oc 120 hz max m @ 20oc 100 khz max (ma) 100 khz 25oc (ma) 100 khz 85oc (ma) 100 khz 125oc refow temp 260oc 35 10 d/7343-31 t498d106(1)035a(20e700 3.5 6.0 700 463 417 185 1 35 22 x/7343-43 t498x226(1)035a(2)e500 7.7 6.0 500 574 517 230 1 35 33 x/7343-43 t498x336(1)035a(2)e500 11.6 6.0 500 574 517 230 1 50 3.3 d/7343-31 t498d335(1)050a(2)e1k1 1.7 6.0 1100 369 332 148 1 50 10 d/7343-31 t498d106(1)050a(2)e1k0 5.0 6.0 1000 387 348 155 1 vdc f kemet/eia (see below for part options) a +20oc max/5 min % @ +20oc 120 hz max m @ 20oc 100 khz max (ma) 100 khz 25oc (ma) 100 khz 85oc (ma) 100 khz 125oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated. designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 7 7 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series recommended voltage derating guidelines rated voltage working voltage recommended application voltage (for maximum reliability) 85c 150c 85c 150c 6.3 6.3 4.22 3.15 2.08 10 10 6.70 5 3.30 16 16 10.72 8 5.28 20 20 13.40 10 6.60 25 25 16.75 12.5 8.25 35 35 23.45 17.5 11.55 50 50 33.50 25 16.50 ripple current/ripple voltage kemet series and case code eia case code maximum power dissipation (p max) mwatts @ 25c w/+20c rise a 3216C18 75 b 3528C21 85 c 6032C28 110 d 7343C31 150 x 7343C43 165 e 7360C38 200 t428p 7360C38 325 s 3216C12 60 t 3528C12 70 u 6032C15 90 v 7343C20 125 t510x 7343C43 270 t510e 7360C38 285 temperature compensation multipliers for maximum power dissipation 25c 85c 125c 150c* 175c** 1.00 0.90 0.40 0.30 0.20 t= environmental temperature *t498 only **t499 only using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = p max * r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation(watts) r = esr at specifed frequency (ohms) 0 0.2 0.4 0.6 0.8 1 1.2 -55 25 85 125 150 % working voltage temperature ( c) % change in working dc voltage with temperature recommended maximum application voltage (as % of rated voltage) 67% 33%
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 8 8 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series reverse voltage solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. the positive terminal is identifed on the capacitor body by a stripe plus in some cases a beveled edge. a small degree of transient reverse voltage is permissible for short periods per the table. the capacitors should not be operated continuously in reverse mode, even within these limits. temperature permissible transient reverse voltage 25c 15% of rated voltage 85c 5% of rated voltage 125c 1% of rated voltage table 2 C land dimensions/courtyard kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia x y c v1 v2 x y c v1 v2 x y c v1 v2 a 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 b 3528-21 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 c 6032-28 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 d 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 x1 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 9 9 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series time temperature t smin 25oc to peak t l t s 25 t p t smax t l t p maximum ramp up rate = 3oc/seconds maximum ramp down rate = 6oc/seconds soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the gold- colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y, and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w, and z construction mno 2 /ta 2 o 5 /ta silver adhesive carbon silver paint washer tantalum wire weld leadframe (-cathode) leadframe (+anode)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 10 10 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series capacitor marking c , d, x case sizes kemet high temperature 150?c rated voltage 227 10 k 230 polarity indicator (+) picofarad code kemet id date code* * 230 = 30 th week of 2012 ht date code * 1 st digit = last number of year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year storage tantalum chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureC reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 60% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within three years of receipt. date code* year month x = 2009 1 = jan 7 = jul a = 2010 2 = feb 8 = aug b = 2011 3 = mar 9 = spt c = 2012 4 = apr o = oct d = 2013 5 = may n = nov e = 2014 6 = jun d = dec kemet high temperature 150? c rated voltage 227 10v polarity indicator (+) picofarad code kemet id date code* k c6 49 internal code
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 11 11 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series tape & reel packaging information kemets molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481C1 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia i 3216-10 8 3,000 12,000 s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 5,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0")
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 12 12 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre elin g cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] table 4 C embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 ,b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 5). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 13 13 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t cente r line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tape 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo ssed carrier p unc hed ca rrier
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 14 14 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w 3 (includes flange distortion at outer edge) w 2 (m ea sured at hu b) w 1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n table 5 C reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 14.4 (0.567) shall accommodate tape width without interference 12 mm 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 18.4 (0.724) 16 mm 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 22.4 (0.882)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 15 15 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 16 16 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 17 17 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series other kemet resources tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product specif cations, statements, information and data (collectively, the information) are subject to change without notice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute C and we specif cally disclaim C any warranty concerning suitability for a specif c customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2012_t498 ? 3/15/2013 18 18 tantalum surface mount capacitors C high temperature t498 150c rated mno 2 series

▲Up To Search▲

Price & Availability of T498D106K050ATE1K0

	To Download T498D106K050ATE1K0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .